Automated Satellite Tracking System

ALL

I have new project for Automated Satellite Tracking System. I am working on this project these days. I will expose all design and technology through my blog in near future

 

Comments

  1. Gayan RathnayakaFebruary 15, 2013 at 10:39 PM

    Dear Padmathilaka .I'm interested in your work with satellite receivers. (i'm also crazy about these stuff) , and i'm good with embedded systems
    so if you want any assistant contact me
    gayanmyte@gmail.com

    ReplyDelete
  2. PadmathilakaFebruary 24, 2013 at 6:04 AM

    This is actually based on embedded system. We are expecting to use some specific processor on this design.

    ReplyDelete
  3. ISAMAIL AIT BENALIAugust 4, 2019 at 4:58 PM


    Welcome to the our website Najm1sat, Najm1sat provides you all you need to know about the satellite of the frequencies of channels, channel key, frequencies of feed, feed key...
    najm sat

    ReplyDelete
  4. BrayanNovember 20, 2019 at 3:27 AM

    Hi

    Very Helpfull

    buy telegram members

    ReplyDelete
  5. BrayanNovember 20, 2019 at 3:30 AM

    Hi

    Very Helpfull

    buy telegram members

    ReplyDelete

Post a Comment

Popular posts from this blog

How to install oscam on Raspberry PI

Image
Requirments No matter it is Raspberry PI 1, 1-B, 2 or 3. You need Raspberry PI, Internet Connection, Mouse and Key Board. HDMI monitor or adapter. I have already tested on Raspbian, Noobs and Ubuntu Core. But it might work on all Linux kernel Operating System too. You have to downloads following application in order to complete OSCAM installation on your PI Noobs or Raspbian Etcher or Win32DiskImager (I will Explain using Etcher since it is easier than Win32DiskImager )     https://etcher.io/ 16 GB Memory Card or May be less than but if you use 2 GB even not vbad with Raspberry PI old Versions. How to Install Raspbian Downloads Raspbian from https://www.raspberrypi.org/downloads/ But if you use older version of Raspberry PI like Version 1 and 2, or if you don't have bigger Memory card, You should not worry and Go and get older version http://downloads.raspberrypi.org/raspbian/images/ How ever You should have an idea which version s...
Read more
 How to install tbsdtv 6909se on Ubuntu 20.04 lspci -vvv | grep 6909 mkdir tbsdriver apt-get install git git clone https://github.com/tbsdtv/media_build.git git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media cd media_build apt install make sudo apt-get install patchutils make dir DIR=../media make distclean apt install gcc sudo apt-get install libproc-processtable-perl make -j4 make install wget http://www.tbsdtv.com/download/document/linux/tbs-tuner-firmwares_v1.0.tar.bz2 tar jxvf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/ reboot dmesg | grep frontend
Read more

How to Boost 3G Signal Using Used Satellite Dish in Sri Lanka

Image
This is simple theory we use to increase signal strength in low signal intensity area. It doesn’t drop signal strength when you connected to internet also. As per my story, I am living 10 km away from Gampaha Airtel tower, Airtel has not covered 3G Ganemulla area. They have tower with edge technology. Even if i use powerful dongle like Huawei   E220, there was no such sign to get of signal.    I used above method to get 3G Airtel Signals and I was able to get Powerful signal. as per the below map you can find It is covered Gampaha not Ganemulla. Following Equipments You need Satellite Dish Old or broken LNBF (KU) Five Meter USB Extension Cable You can remove Inside circuit and just use plastic cover for experiment, cut a hole on the top plastic cover and fix wire and dongle as below pictures Finally It will be like below Then you can fix dish to a Galvanized Iron and stand as below and little according to your p...
Read more