Control Satellite Dish Using RF

There is no much technical invention involving this. Just use DC 12v 10A relay 2CH wireless RF Remote Control Switch Transmitter.

The Block Diagram for Motor Connect, This picture is taken from seller’s web site.
 




  



The Actuator is 36 V DC with load current 3A. So there is no any issues in connecting with maximum load.

 






  



Connection After






Sooner I will Release Video 

Comments

  1. ISAMAIL AIT BENALIAugust 4, 2019 at 4:59 PM


    Welcome to the our website Najm1sat, Najm1sat provides you all you need to know about the satellite of the frequencies of channels, channel key, frequencies of feed, feed key...
    najmsat

    ReplyDelete

Post a Comment

Popular posts from this blog

How to install oscam on Raspberry PI

Image
Requirments No matter it is Raspberry PI 1, 1-B, 2 or 3. You need Raspberry PI, Internet Connection, Mouse and Key Board. HDMI monitor or adapter. I have already tested on Raspbian, Noobs and Ubuntu Core. But it might work on all Linux kernel Operating System too. You have to downloads following application in order to complete OSCAM installation on your PI Noobs or Raspbian Etcher or Win32DiskImager (I will Explain using Etcher since it is easier than Win32DiskImager )     https://etcher.io/ 16 GB Memory Card or May be less than but if you use 2 GB even not vbad with Raspberry PI old Versions. How to Install Raspbian Downloads Raspbian from https://www.raspberrypi.org/downloads/ But if you use older version of Raspberry PI like Version 1 and 2, or if you don't have bigger Memory card, You should not worry and Go and get older version http://downloads.raspberrypi.org/raspbian/images/ How ever You should have an idea which version suit f
Read more
 How to install tbsdtv 6909se on Ubuntu 20.04 lspci -vvv | grep 6909 mkdir tbsdriver apt-get install git git clone https://github.com/tbsdtv/media_build.git git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media cd media_build apt install make sudo apt-get install patchutils make dir DIR=../media make distclean apt install gcc sudo apt-get install libproc-processtable-perl make -j4 make install wget http://www.tbsdtv.com/download/document/linux/tbs-tuner-firmwares_v1.0.tar.bz2 tar jxvf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/ reboot dmesg | grep frontend
Read more

Ubuntu 22.04 - DVB-S2 _DTB drivers

 #install compile essentials sudo apt --yes install linux-headers-$(uname -r) sudo apt --yes install build-essential sudo apt --yes install patchutils libproc-processtable-perl sudo apt --yes install dvb-apps # add --allow-unauthenticated if failing gpg signature check #download firmware wget http://www.tbsdtv.com/download/document ... .0.tar.bz2 wget http://www.tbsdtv.com/download/document/linux/tbs-tuner-firmwares_v1.0.tar.bz2 sudo tar jxvf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/ #new build git clone https://github.com/tbsdtv/media_build.git git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media cd media_build make dir DIR=../media make allyesconfig make -j4 sudo make install #build and make tbs opensource drivers sudo make rmmod sudo modprobe saa716x_tbs-dvb lspci dmesg | grep frontend #load "saa716x_tbs-dvb" modules echo saa716x_tbs-dvb | sudo tee /etc/modules-load.d/tbs.conf #install dvb-apps sudo apt --yes install dvb-apps sudo lsdvb
Read more